Determination of surface charge properties of PC-12 cells by electrophoresis

The electrophoretic behavior of pheochromocytoma (PC-12) cells was investigated both experimentally and theoretically. Cell mobility in aqueous media at different pHs and ionic concentrations was measured, and a model, which assumed that the cell surface contains both acidic and basic functional groups, was proposed. As a result, it was revealed that the experimental data gathered can be described satisfactorily by assuming that the cell surface contains two types of monovalent acidic functional groups and one basic functional group. The values of the dissociation constants of the acidic and basic groups are found to be close to those of acidic amino acids, which indicates that the acidic amino acids may play an important role in the surface electrical properties of PC-12 cells.     

Diffusion of Acetic Acid Across Oil/Water Interface in Emulsification-Internal Gelation Process for Preparation of Alginate Gel Beads

Alginate has been widely used in cell microencapsulation and drug delivery systems in the form of gel beads or microcapsules.Although an alternative novel emulsification-internal gelation technology has been established and both the properties and the potential applications of the beads in drug delivery systems have been studied,the mechanism has not been well understood compared with the traditional droplet method(external gelation technology).On the basis of our previous knowledge that the novel technology is composed of complicatedly consecutive processes with multistep diffusion and reaction,and the diffusion of acetic acid across oil/water interface being the prerequisite that determines the occurrence and rate for the reactions and the structures and properties of final produced gel beads,a special emphasis was placed on the diffusion process.With the aid of diffusion modeling and simple experimental design,the diffusion rate constant and diffusion coefficient of acetic acid across oil/water interface were determined to be in the orders of magnitude of 10-6 and 10-16,respectively.This knowledge will be of particular importance in understanding and interpreting the formation,structure of the gel beads and the relationship between the structure and properties and guiding the preparation and quality control of the gel beads.     

A facile synthesis of bifunctional phospholipids for biomimetic membrane engineering

We report a facile synthesis of bifunctional phospholipid conjugates by acylation of N-protected lyso-phosphatidylethanolamine with 12-acryloxy-1-dodecanoic acid and followed with deprotection and conjugation with biotin, FITC, Texas Red, or EMC groups. The lipid conjugates can be used to generate a multifunctional substrate-supported phospholipid membrane via bioconjugation reaction to biotin or covalent attachment to EMC at their hydrophilic terminus. In addition, conjugation to fluorophores, FITC or Texas Red, provides a convenient mechanism to monitor lipid membrane formation and stability. Significantly, in situ photopolymerization of the acrylate group at the end of one of two hydrophobic alkyl chains stabilizes the phospholipid membrane.     

Swelling behavior of amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether,and their interaction with cationic surfactant

Amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether were synthesized by -radiation-induced free radical polymerization. Hydrogels with certain copolymer compositions showed thermo-sensitive behavior in aqueous solutions. The swelling behavior of the hydrogels in cetylpyridinium bromide aqueous solution was studied. Increased swelling of the hydrogels was observed in the surfactant solutions. The increased swelling was more prominent for the hydrogels with a higher content of hydrophobic moiety in the copolymer composition, and with higher surfactant concentration. The reason for this phenomenon is discussed. Treatment of some hydrogels in the surfactant solutions resulted in higher swelling ability in distilled water with distinct thermo-induced contraction over a narrow temperature interval.     

Growth control of homogeneous pulsed electrodeposited Co thin films on n-doped Si(1 1 1) substrates

Cobalt thin films were deposited by pulsed electrodeposition on n-doped silicon substrates. We show that the morphology and the magnetic properties of the samples can be controlled by a careful choice of the deposition conditions. Atomic force microscopy measurements reveal a granular growth with grain size and homogeneity strongly dependent on the total deposition time and pulse frequency of the applied signal. Magnetic force microscopy and magnetization measurements indicate the formation of magnetically correlated grain systems with a maximum magnetic correlation and homogeneity for samples with grain diameters of about 40 nm.     

A comparison of the adsorption of saliva proteins and some typical proteins onto the surface of hydroxyapatite

Adsorption of protein from saliva on hydroxyapatite was compared with adsorption of several typical proteins with different electric charges, i.e. lysozyme, human serum albumin, β-lactoglobulin and ovalbumin. Adsorbed amounts of these proteins were determined and electrophoretic mobilities of protein-covered hydroxyapatite particles were measured, at different values for the adsorbed mass and, therefore, at various degrees of surface coverage. Also, adsorption kinetics were investigated by streaming potential measurements of a hydroxyapatite surface in contact with a protein solution, allowing monitoring of changes in the zeta-potential of the protein-covered hydroxyapatite surface in real time. The adsorbed amounts show that, as compared to most of the other proteins, the saliva proteins have remarkably low adsorption affinity. The measured values for the electrophoretic mobilities indicate that the positively charged proteins in the saliva mixture preferentially adsorb onto the negatively charged hydroxyapatite surface; this is most pronounced at low protein concentration in solution (i.e. at low coverage of the surface by the protein). Preferential uptake of the positively charged saliva proteins during the initial stages of the adsorption process is also concluded from the results of the kinetics experiments. Preferential adsorption of positive proteins is somewhat suppressed by the presence of Ca²⁺ ions in the medium. The results suggest that an acquired pellicle on a tooth in an oral environment contains a significant fraction of positively charged proteins. The positively charged proteins in the pellicle reduce the zeta-potential at the tooth surface to low values; consequently, electrostatic forces are expected to play only a minor role in the interaction with other components (e.g. bacterial cells).     

A preliminary study on fabrication of nanoscale fibrous chitosan membranes in situ by biospecific degradation

A new approach for in situ fabrication of nanoscale fibrous chitosan membrane by biospecific degradation under physiological situation was studied. The chitosan binary blend membranes were fabricated by solvent casting of chitosan solution containing highly deacetylated chitosan (HDC) and moderately deacetylated chitosan (MDC) with different ratio. The biodegradation process was performed in PBS (pH 7.4) containing lysozyme at the temperature of 37 °C. Experimental results from weight loss, reducing sugar in surrounding media, FT-IR, X-ray diffraction, gel permeation chromatography (GPC) and SEM throughout the study showed that the biospecific degradation by lysozyme had removed MDC component selectively. When the ratio of MDC in the binary blend membranes amounted to 0.5, nanoscale domains of HDC and MDC were obtained, and thus a nanoscale fibrous structure was fabricated after biospecific degradation of MDC. This nanofibrous structure and the biospecific degradation of chitosan membranes can have potential advantages and interesting implications in tissue engineering and drug delivery.     

Review of absolute doubly differential cross-section experiments and cross-section ratios for electron bremsstrahlung from rare gas atom and thin-film targets

We discuss doubly differential cross-section experiments for electron bremsstrahlung from free gas atom and thin-film targets for electron energies of 100 keV or less. We compare cross-section ratios for different target atoms with two theoretical models: ordinary bremsstrahlung and total bremsstrahlung calculated in the stripping approximation. Ratios of cross sections have been used to improve the comparison between experiment and theory when only relative cross sections are available or when the error in the absolute cross section is large. We also discuss additional background processes that may be more important in gas target experiments.     

取代基物化参数及其在药物定量构效关系中的应用

把取代基电性、立体及疏水性物化参数组合建立一种新取代基描述方法, 对环尿素类和N,N-二甲基-2-溴苯乙胺类衍生物进行结构表征. 对训练样本集通过逐步回归筛选变量, 所建多元线性回归方程R2分别为0.853和0.960, 留一法交互检验Rcv2分别为0.723和0.901；用预测集样本作外部预测, 所得Qext2分别为0.7617和0.7653. 结果显示：环尿素类化合物结构中苯环邻位立体、间位疏水、对位疏水及立体因素对该类药物抗HIV活性产生阻抑作用； N,N-二甲基-2-溴苯乙胺类苯环上取代基立体因素及对位给电子效应有利于提高肾上腺素能阻断活性.     

Preparation of thin SnO2 layers by inorganic sol-gel process

SnO₂ sols were prepared in the following way: (1) precipitation of metastannic acid with aqueous ammonia from aqueous solutions of SnCl₄, (2) washing the precipitates with NH₄NO₃ solution and water, (3) peptization of precipitates in water, sometimes with an addition of HNO₃, at elevated temperature using mechanical stirring. In those sols, sometimes diluted with water or ethanol, substrates (glass or silica derived wafers) were dipped and withdrawn at various rates. Gel coatings were converted into crystalline SnO₂ by thermal treatment at 600°C. Coatings with thickness between 300–2000 Å were prepared.